Maintaining Your Printer; General Care - Kodak ESP 5 User Manual

Maintaining Your Printer

7
The Kodak ESP 5 All-in-One printer requires little maintenance. However, you should
regularly clean the scanner glass and lid backing to remove dust and fingerprints.
Fingerprints and other debris on the glass or lid backing could slow down performance and
affect the quality and accuracy of scanning.
Service agreements are available in some countries. Contact dealers for Kodak products
for more information.
For recycling and or disposal information, contact your local authorities. In the U.S., visit
the Electronics Industry Alliance Web site at www.eiae.org.

General Care

•
To clean the printer, wipe the outside with a clean, dry cloth
•
Keep the surrounding area vacuumed and litter-free
•
Protect the printer from tobacco smoke, dust, sand, other small particles (such as
crumbs), and liquid spills
•
Avoid placing objects on the printer
•
Keep the printer supplies away from direct sunlight and out of high-temperature
environments
•
Do not allow chemicals, such as suntan lotion, to come into contact with the painted
surface of the printer
•
If the printer has been exposed to bad weather or has water inside it, turn it off and let it
dry completely. If this does not solve the problem, contact customer support (see
"Telephone Customer Support" on page 57)
Kodak ESP 5 Printer User Guide
Caution:
Always disconnect the power on the this All-in-One printer
before cleaning it. Do not use harsh or abrasive cleaners or organic
solvents on the printer or any of its parts.
33