Kodak ESP 5 User Manual page 12

Printer Overview
Light Status
Off
On
Light Status
Off
Blinking
On
6
Printer Power Cord Light
Cause
The printer power cord is not
properly connected to the printer.
The electrical power cord is not
properly connected to your electrical
outlet.
Your wall outlet has no power.
The problem may lie with the power
supply.
The power supply is supplying power
to the printer.
Memory Card Slot Slight
Cause
Either the SD/MMC card is not
inserted or is improperly inserted in
the card slot.
The internal card reader is
initializing or communicating with a
memory card.
An SD/MMC card is properly
inserted in the card slot.
Action/Solution
Reconnect the printer power cord plug
to the printer.
Reconnect the cord to the electrical
outlet. Ensure that the electrical
power cord is fully connected to the
alternating current (AC) adapter at
the end of the printer power cord.
Plug a working device into you wall
outlet to test it, or have it checked by
an electrician.
Visit Kodak.com for additional
troubleshooting steps, or contact your
local Kodak call center.
None.
Action/Solution
Remove and reinsert the SD/MMC
card.
None.
None.
Kodak ESP 5 AiO Printer User Guide