Setting Up Your Picture Frame - Kodak EasyShare S510 Quick Start Manual

Getting started
Storing the remote control
1 2
Replacing the remote control battery
Replace with a CR2025, 3V lithium cell battery.

Setting up your picture frame

Buttons and controls
All buttons and controls described in this guide (for example: press
remote control unless otherwise noted.
2
1 Install the remote control holder on the back of the
frame
2 Slide the remote into the holder for convenient,
out-of-the-way storage.
*
release tab
(page i).
Push and hold the release
tab* while pulling the battery
holder out of the remote.
Follow the graphic on the
back of the remote control.
www.kodak.com/go/easysharecenter
) are on the