Picture Frame Problems - Kodak EASYSHARE W820 Extended User Manual

I didn't connect to my network the first time I turned on my frame. Can I
do it now?
Yes, you can.
→
1 Tap Home
2 Highlight Scan for wireless networks, then tap OK.
3 Continue with step

Picture frame problems

If...
Frame cannot connect
to the wireless network
—"Wireless network
not found" appears.
Frame does not
turn on.
www.kodak.com/go/support
.
Settings Slide to highlight Network, then tap Select.
1 on page 5.
Try one or more of the following
I
Make sure you have a wireless router and that it is broadcasting
the SSID, or enter the SSID manually.
I
Make sure you are within the operating range of the network.
Move the frame into the same room with the router.
I
Make sure your frame is using the latest firmware. Check
www.kodak.com/go/digitalframesupport
I
If your network security is enabled
key (WEP or WPA). The person who set up your network can help
you with this information.
I
Make sure the power cable that was included with your frame is
connected securely (see
I
Unplug the power cable for 5 seconds, then reconnect the cable.
Press and hold the power button (for about 2 seconds), then
release.
Get other manuals https://www.bkmanuals.com
Troubleshooting and support
for updates.
(See page 8), enter your security
page 2).
68