Attaching the frame stand
Turning on the frame
CAUTION:
Do not use this power cable with other devices, including digital
cameras; the higher voltage (12 V) required by the frame will cause
serious damage to other devices.
www.kodak.com/go/digitalframesupport
1 Place the square tab of the stand into the slot on the
back of the frame.
2 Slide the tab into the slot until it's secure.
NOTE: To change the orientation from landscape
see
page
13.
Plug in the power cable included with the frame.
■
The frame turns on automatically. The language screen
appears the first time you power up your frame.
Y
our power cable may look different from the one pictured.
Use the plug that accommodates your type of power outlet.
Getting started
to portrait
,
3