Table of Contents
Advertisement
Installation Guide
How to Install Front Handles/Rack Mounting Flanges
How to Install Front Handles/Rack Mounting Flanges
The Agilent 4287A can be made more convenient for use with two key options: handles
mounted on each side of the front for easy transport and flanges to attach the instrument to
a rack as part of a multi-component measurement system (Table 2-2).
Table 2-2
Agilent 4287A rack mounting options
Name
Option 1CN handle kit
Option 1CM rack-mount kit
Option 1CN rack-mount kit
and handle kit
How to install handle kit (Option 1CN)
Install the handle kit by following these steps:
Step 1. Make sure that all of the contents of the Option 1CN handle kit have been supplied in the
shipping container (Table 2-3).
Table 2-3
Contents of Option 1CN handle kit
Step 2. Remove the trim strips from both sides of the outer frame of the Agilent 4287A front panel.
22
Agilent Part
Number
5063-9229
Two front handles used for transport and relocation of the
Agilent 4287A
5063-9216
Two flanges (locking side plates) for mounting the Agilent
4287A on a rack (482.6 mm wide) conforming to EIA Standard
5188-4430
Both the rack mounting flanges (locking side plates) and
handles
Front handle
Screw
Trim strip
Description
Name
Quantity
2
6
2
Chapter 2
Advertisement
Table of Contents
