Eis Operations - Garmin G600 Pilot's Manual

8.6

EIS Operations

PHASE
OF FLIGHT
Initial Setup
Preflight
En Route
Post Flight
8.6.1 Initial Setup
Initial setup operations include:
•
Customizing system settings
•
Setting fuel tabs
•
Setting engine advisories
•
Calibrating fuel flow
CUSTOMIZE SYSTEM SETTINGS
Specify all necessary EIS settings. Customization options reside in either the System
page (GDU 1060) or the System menu (GDU 700( )).
SET FUEL FULL AND TAB CAPACITY
Specify estimated fuel full and tab values using the controls in the fuel computer.
SET ENGINE ADVISORIES
Specify engine advisory parameters and limit values.
190-01717-10 Rev. H
OPERATION
Customize system settings
Set fuel full and tab capacity levels
Set engine advisories
Calibrate fuel flow
Add fuel
Lean the engine
Monitor gauges
Record engine and flight hours
For convenience, flight and engine
hours display at startup.
Pilot's Guide
Fuel & Engine Indicating System
8-19