Related Manuals for Hyundai HPEP1010-1
Summary of Contents for Hyundai HPEP1010-1
- Page 1 PORTABLE POWER TOOL PLASTER RANGE HPEP1010-1 WARNING: Read thoroughly the instruction manual before use...
-
Page 2: Table Of Contents
CONTENTS SAFETY WARNINGS………………………………………………………………………3 TECHNICAL SPECIFICATIONS …………………………………………………………8 USE………………………………………………………………………………………… 9 CARE AND MAINTENANCE…………………………………………………………….11 DISPOSAL………………………………………………………………………………….11 EC DECLARATION………………………………………………………………….……12 WARRANTY………………………………………………………………………………13 PRODUCT FAILURE………………………………………………………………….…14 WARRANTY EXCLUSIONS…………………………………………………………….15... -
Page 3: Safety Warnings
SAFETY WARNINGS GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool 1) Work area a) Keep work area clean and well lit. - Page 4 c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents. d) Remove any adjusting key or wrench before turning the power tool on.
- Page 5 SAFETY INSTRUCTION FOR ALL OPERATION a) This power tool is intended to function as a sander. Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
- Page 6 cord. Cutting accessory contacting a "live" wire may make exposed metal parts of the power tool "live" and shock the operator. K) Position the cord clear of the spinning accessory. If you lose control, the cord may be cut or snagged and your hand or arm may be pulled into the spinning accessory.
- Page 7 d) Take special care when working corners, sharp edges etc. Avoid twists and snaps of the accessory. Corners, edges or sharp twists tend to hang the rotating accessory and cause loss of control or kickback. e) Do not attach a saw chain, blade wood carving saw chain or toothed saw blade.
-
Page 8: Technical Specifications
TECHNICAL SPECIFICATIONS 1. Description of the tool 1- Variable speed drive 2- ON/OFF switch 3- Dust bag 4- Flexible hose 5- Adapter used to connect the sander to a flexible hose 6- Flexible hose 7- Attachment to connect the strap 8- Extra handle Support ring The support ring allows adjusting the sanding depth. -
Page 9: Use
2. Technical data Model HPEP1010-1 Power supply 230-240V˜ 50Hz Power 1010W No-load speed 3200/min max Diameter of the sanding plate 225mm Net weight 2.16 kg Noise emission Sound pressure level L 92,8dB(A) Sound pressure level L 103,8dB(A) Uncertainty K K= 3 dB(A) - Page 10 1)Assembly a. Assembly of the dust bag Before using the tool, you should install the dust bag to the tool. Use only a dust bag. Any other container is not compatible with this tool. Wear a protective mask. Harmful and toxic dust may be produced when using the sander. This dust can interfere dangerously with your and others health.
-
Page 11: Care And Maintenance
c. Grinding work To perform your sanding work, install the appropriate disk according to the surface to be sanded (ceiling, corner of the ceiling, different parts of a wall). When sanding a wall up or a ceiling, use a ladder to reach the place to be sanded. d. -
Page 12: Ec Declaration
ZI, 32 RUE ARISTIDE BERGES – 312070 CUGNAUX – FRANCE Declares that the machinery designated below: PORTABLE POWER TOOL PLASTER RANGE Model: HPEP1010-1 Serial number: 20210864141 -20210864390 Complies with the provisions of the Directive « machinery » 2006/42/CE and national laws... -
Page 13: Warranty
WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor. -
Page 14: Product Failure
PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. -
Page 15: Warranty Exclusions
WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •...