Hmi Pin; Hmi User Rights - Honeywell CIPer 50 User Manual

HMI pin

PIN, PIN-configuration, and log-off definition are fully integrated with the Niagara "User Service". This makes it
secure and allows to re-use the user definitions already in place for the station.
NOTE
It is mandatory to enter a 5-digit (Numeric only) PIN here. For security reasons, there is
no default PIN.
If the PIN is not present, the controller will not function.

HMI user rights

In the Admin column (marked red) for the user permissions of the RoleService, it is mandatory to enable "Read"
rights to the categories you want to access via HMI, otherwise, the user will have no access.
You may also provide the "Write" and "Invoke" rights to a category as required.
CIPer
TM
9
MODEL 50 CONTROLLER – USER GUIDE
31-00198-03