Basic Operation Procedures; Login / Entering Pin - Honeywell CentraLine EAGLEHAWK NX User Manual

EAGLEHAWK NX CONTROLLER
NOTE: The controller screens shown in this user guide are examples and may
differ in details from the screens displayed on your EAGLEHAWK NX
controller.
In order to operate the controller, you must always login via pin. The pin is issued in
the CentraLine NX workbench and has at least 5 numerical characters (see
EAGLEHAWK NX HMI Driver user guide, form no. EN2Z-1052GE51).
Procedure
1. On any highlighted menu icon in the HOME screen, push the rotate&push
button.
The LOGIN, Select User menu displays.
2. Turn the rotate&push button to navigate to and highlight the user.
3. Push the rotate&push button.
The LOGIN, Enter PIN screen displays.
4. Push the rotate&push button. The PIN field is enabled and indicated by five
asterisks *****. At the first digit, the number 0 is flashing by default.
5. Adjust the first number of the pin by turning the rotate&push button.
13

BASIC OPERATION PROCEDURES

BASIC OPERATION PROCEDURES

Login / Entering PIN

EN2Z-1053GE51 R0119