Dual Ethernet; Separated Networks - Honeywell CIPer 50 User Manual

Dual Ethernet

The CIPer Model 50 is equipped with a Dual Ethernet interface. All information about the Dual Ethernet can be
found in the CIPer Model 50 Installation & Commissioning Instructions – 31-00233.

Separated networks

SEPARATED NETWORKS = DEFAULT SETTING
For cybersecurity reasons, the default setting of the Dual Ethernet is with the following IP settings:
•
Ethernet port 1:
• Ethernet port 2:
IP address 192.168.200.20, subnet 255.255.255.0
IP address 192.168.201.20, subnet 255.255.255.0
17
CIPer MODEL 50 CONTROLLER – USER GUIDE
TM
31-00198-03