Configuring Smtp (Email) Settings; Figure 6-5 Pppoe; Figure 6-6 Smtp; Table 6-3 Smtp (Email) Configurations - Honeywell Performance Series User Manual

Figure 6-5 PPPoE

1. To enable PPPoE, select the Enable checkbox.
2. Enter the PPPoE user name and password that you received from your Internet service
provider (ISP).
3. Click Save to save the current setup, and then reboot the camera to activate this new
setup. The camera connects to the Internet via PPPoE after rebooting.
When PPPoE is enabled, disable UPnP so that it does not interfere
Note
with PPPoE.

Configuring SMTP (Email) Settings

Go to Setup  Network Setup  SMTP (Email) page.

Figure 6-6 SMTP

Table 6-3 SMTP (Email) Configurations

Parameter
SMTP Server
Port
Function
Enter the server address.
The default setting is 25. You can modify this setting as
necessary.
Configuring Network Settings
39