Profile Management - Honeywell Performance Series User Manual

Performance Series IP Camera Software Configuration Guide
By default, the camera automatically outputs color video or black-and-white video depending
on the amount of light in the scene. To output only color video, set Mode to Color. To output
only black-and-white video, set Mode to Black & White.
Sensitivity
Adjusts the sensitivity threshold at which the camera switches from Color to Black & White
mode. Set to Low, Medium (default), or High.
Note
Available only when Day & Night is set to Auto.
Delay
Adjusts the delay value of the switch from Color to Black & White mode. The value ranges
from 2 to 10. The default value is 6.
Note Available only when Day & Night is set to Auto.
Illuminator
This configuration is available only when the device is equipped with illuminator.
Go to Setup  Camera Setup  Conditions Illuminator.
Manual: Adjust the brightness of illuminator manually, and then the system will supply
illuminator to the image accordingly.
Auto: The system adjusts the illuminator intensity according to the ambient lighting
condition.
Off: Illuminator is off.

Profile Management

Go to Setup  Camera Setup  Conditions Profile Management.
After you have configured the camera properties for each profile (Normal, Day, Night), you can
set the profile(s) that you want the system to use.
26