Table of Contents
Advertisement
panel until the display brightness function is
selected.
2. Press the
and
the control panel to select the desired
brightness, from value 1 (low brightness) to
value 5 (high brightness).
3. Press the
button to confirm.
The display brightness function is factory
set to high.
Sound
Whenever one of the display symbols is
pressed, the appliance beeps. This
setting disables these sounds.
1. After entering the setting menu, press the
and
touch buttons on the control
panel until Sound function is selected.
CLEANING AND MAINTENANCE
Cleaning the appliance
See General safety instructions.
Cleaning the surfaces
To keep the surfaces in good condition, they
should be cleaned regularly after use. Let them
91477A631/A
touch buttons on
2. Press the
and
the control panel button to disable the sound
associated with the touch of the symbols on
the display.
3. Press the
button to confirm.
Other settings
Eco light
For greater energy savings, the lights
inside the oven cavity are automatically
deactivated approximately one minute
after the start of cooking or after the
door is opened.
To stop the appliance from
automatically deactivating the light after
approximately one minute, set this
mode to Off.
The Eco light function is factory set to
On.
• To deactivate the Eco light function, press
the
key for a few moments.
• To reactivate the Eco light function, press the
key for a few moments.
cool first.
Ordinary daily cleaning
Always and only use specific products that do
not contain abrasives or chlorine-based acids.
Pour the product onto a damp cloth and wipe
the surface, rinse thoroughly and dry with a soft
cloth or a microfibre cloth.
CLEANING AND MAINTENANCE - 81
touch buttons on
Advertisement
Table of Contents
