Download Print this page

Before You Begin - Planar Dome E Series Quick Reference

Windows xp/2000

Advertisement

Before You Begin

Check that your system meets these requirements for installation of the Dome E2, E3, or E5
display system. The Dome E3 display is compatible with either the DX2 or the AX3 board.
EX Display Display Controller
Dome E2
DX2
Dome E3
DX2
Dome E5
DX2
Dome E3
AX3
Increasing the PCI Bus Performance
(PCICacheMode registry entry)
On systems with 64-bit PCI slots, use the display
driver to enable write-combining for the display
controller. Enabling this function can improve video
performance on the board by 100% or more.
The results: faster image loads, increased window
and level speed, and enhanced system performance.
For more information, visit www.planar.com.
2
System Requirements
PCI slot per board
(64-bit recommended)
50 MB hard disk space
256 MB RAM
CD-ROM drive
Intel Pentium 4/Xeon; AMD
Athlon 64/K7/XP or compatible
PCI Express x16 lane slot
50 MB hard disk space
256 MB RAM
CD-ROM drive
Power supply, 350 watts or greater
Operating System
Windows XP or
Windows 2000
with Service Pack 4
or higher
Windows XP or
Windows 2000
with Service Pack 4
or higher
Warning
Avertissement
Avvertenza
Advertencia
Wear an antistatic heel or wrist
strap when installing the controller
and display to avoid damage to
computer components.
Warnung

Advertisement

loading

This manual is also suitable for:

Dome e2Dome e3Dome e5