Installing A Clarity Matrix Lcd Video Wall; Before You Begin; Tools/Equipment List; Other Things You May Need - Planar Clarity MX46HD Quick Start Manual

Installing a Clarity
Matrix LCD Video Wall
This section explains how to install a Clarity Matrix Video Wall. We suggest that you
read this entire section before you attempt to install the wall.

Before You Begin

Make sure you have all the items in the following lists before you begin unpacking
and installing your Clarity Matrix Video Wall(s).

Tools/Equipment List

Depending on your installation, you may need one or more of the following items:

Other Things You May Need

• Drill and bits
• Nut drivers
• Pencil
• 3mm hex key
• M6 (#1/4-20) wrench
• String/string level
• Digital/laser level
• Ladders/lift
• Back brace
• Stud finder (if hanging LCD modules on a wall)
• Quad controller module address adjustment tool (included in your accessory
kit)
• LCD screen cleaner or LCD wipes - available at most electronics stores
• two capable people to lift LCD modules into place
At least
Clarity Matrix Video Wall Quick Start Guide 15