Using Ilo 4 Configuration Utility - HP HPE Edgeline EL1000 User Manual

Using iLO 4 configuration utility

Using iLO 4 configuration utility
Procedure Procedure
1. Access the System Utilities menu .
2. Navigate through the menu options System Configuration
screen displays.
3. Change DHCP Enable DHCP Enable to OFF .
4. Configure the IP Address IP Address , Subnet Mask
Network Options screen. Network Options
5. Once completed, press ESC ESC to back out of the menus. Save the settings when prompted.
6. After saving all settings, iLO prompts for a reset in order for the new settings to be used. Reset the system.
System Configuration > iLO 4 Configuration Utility
Subnet Mask , and Gateway Address Gateway Address as required. The following image is an example of a completed
iLO 4 Configuration Utility > Network Options Network Options. The Network Options
Using iLO 4 configuration utility 86