Hot-Plug Drive Led Definitions - HP HPE Edgeline EL1000 User Manual

Hot-plug drive LED definitions

Hot-plug drive LED definitions
When a drive is configured as part of a Smart Array and connected to a powered-up controller, the drive LEDs indicate the condition of
the drive. If no Smart Array adapter is present, then these drives will not be hot pluggable, but will still show the activity LEDs.
Item LED Item LED Status Status
1 Locate Solid blue
Flashing blue
2 Activity Rotating green
ring
Off
3 Do not Solid white
remove
Off
4 Drive Solid green
status
Flashing green
Flashing
amber/green
Flashing amber
Solid amber
Off
Definition Definition
The drive is being identified by a host application.
The drive carrier firmware is being updated or requires an update.
Drive activity
No drive activity
Do not remove the drive. Removing the drive causes one or more of the logical
drives to fail.
Removing the drive does not cause a logical drive to fail.
The drive is a member of one or more logical drives.
The drive is rebuilding or performing a RAID migration, strip size migration,
capacity expansion, or logical drive extension, or is erasing.
The drive is a member of one or more logical drives and predicts the drive will fail.
The drive is not configured and predicts the drive will fail.
The drive has failed.
The drive is not configured by a RAID controller.
Hot-plug drive LED definitions 20