Install The Pcie Card - HP HPE Edgeline EL1000 User Manual

Install the PCIe card

Install the PCIe card
The system supports optional PCIe cards.
IMPORTANT: The PCIe card is not hot-pluggable. The system must be powered down to install this card. IMPORTANT:
Procedure Procedure
1. Power down the system .
2. Remove the blade, if installed.
3. Remove the access panel .
4. Using a Torx driver, remove the three black T-15 Torx screws.
5. Lift the PCIe riser cage using the finger hold positions in the riser cage.
6. Disconnect the power cable.
Install the PCIe card 61