Installing The Wall Mounting Option Kit - HP HPE Edgeline EL1000 User Manual

Installing the wall mounting option kit

Installing the wall mounting option kit
Procedure Procedure
1. Using the wall mount bracket, mark the locations for the wall mount screws.
2. Install the wall mount anchors and screws in the marked locations.
3. Align the wall mount bracket to the system.
4. Using a Torx driver, insert and tighten four T15 Torx screws to secure the bracket to the system.
5. Place the holes in the wall mount bracket over the wall mounting screws and slide to lock into place.
Installing the wall mounting option kit 53