Clarity C4230 User Manual page 13

C4230
The phone cord plugs into the C4230 phone base as shown above. Plug the other end
of the phone cord into a telephone wall jack.
Connect the AC adapter to the back of the base and a 120V wall outlet as
shown above.
To avoid potential interference, the phone should not be located near electronic
equipment, such as personal computers, televisions or microwave ovens.
1. Complete connection instructions
shown in this guide.
2. Install and charge battery as shown
on page 11-12.
Red
3. Make sure
bottom of base.
HANDSET
4. To answer a call, press TALK on
the handset.
5. When placing a call press TALK and
dial number.
6. After completing a call press TALK
again and return handset to base unit.
Quick Reference Guide
HOW TO CONNECT YOUR C4230 PHONE
HOW TO DIAL OR RECEIVE A CALL
LED light is on at
THE C4230 PHONE IS DESK
MOUNTABLE ONLY.
AC adapter, connect to 120V
power source and phone
BASE
7. When receiving a call press
SPEAKER button on base.
8. When placing a call press SPEAKER
button then dial number from base.
9. After completing a call press the
SPEAKER button again.
10. Sound will reset to normal level on
both handset and base unit after
completing calls. Pressing the BOOST
button on subsequent calls will return
the volume to your set sound level.
Wall phone jack
Phone cord
13