Advertisement
TH-42PA20E / TH-42PA20B
13 Hotel mode
1. Purpose
Restrict a function for hotels.
2. Access command
· Enter to the Service 2 Mode.
· Press RECALL button on remote control and entry to
the EAROM EDITOR Mode.
· Set the data of EEPROM(ADDRESS 160) to C0.
Push the Power switch(button) off/on the set(the remote
control) to turn the set off/on.
It can be made Hotel mode.
3. Exit command
· First, set the data of EEPROM(ADDRESS 160) to 80.
Next, Push the Power switch(button) off/on the set(the
remote control) to turn the set off/on.
Then, it is no longer hotel mode.
4. Access command to the Hotel mode setup menu
· <Prerequisite> : It is conditions that the data of
EEPROM(ADDRESS 160) is C0.
In order to display the Hotel mode setup menu, please
enter the following command (within 2 second).
[TV]:down + [REMOTE]:TV/AV(3 times)
Then, the Hotel mode setup menu is displayed.
5. Explain the Hotel mode setup menu
CAUTION
This
setup
EEPROM(ADDRESS 160) will be C0, even if each
settings were done.
is
not
valid,
unless
item
Initial INPUT
Initial VOL level
Maximum
VOl
level
Initial POS
Button lock
Remote lock
data
of
36
Function
Select input signal modes.
Set this signal, each time power is switched on.
<Selection> :
Off/TV/AV1/AV2/AV2S/AV3/Av3S/AV4/Av4S/AV4
C/PC
· Off: give priority to a last memory. However,
Euro model is compulsorily set to TV.
· AVnS/AVnC: only Euro model selectable
· PC: selectable with VGA option
Adjust output Volume.
Set this volume, each time power is switched on.
If the value of InitVol is changed, volume will
change. However, priority is given to a last
memory when InitVol is Off. When "InitVol" is
larger than "MaxVol", make "InitVol" and "MaxVol"
the same.
<Selection/Range> :
Off/0 to 100
· Off: give priority to a last memory
Adjust maximum volume.
Set this max. volume, each time power is
switched on.
When "MaxVol" is smaller than "InitVol", make
"MaxVol" and "InitVol" the same, if "InitVol" is not
Off.
<Range> :
0 to 100
Select program number.
Set this program number, each time power is
switched on.
<Selection> :
Off/0 to 99 (Euro model)
· Off: give priority to a last memory
Select local key conditions.
Set this condition, each time power is switched
on.
<Selection> :
Off/SETUPMENU/All
· Off: altogether valid
· SETUP: restrict F-key selection
(Tuning guide(menu) can not be selected.)
· MENU: restrict F-key selection
(only Volume/Mute can be selected.)
· All: altogether invalid.
Select remote control key conditions.
Set this condition, each time power is switched
on.
<Selection> :
Off/SETUP/MENU
· Off: altogether valid
· SETUP: only Setup menu is invalid
· MENU: Picture/Sound/Setup menu are invalid
Advertisement
