Advertisement
14. Remove the C2 module.
A. Remove the flexible cable holder fastening screws (×8)
connected to the C2 module, and remove the flexible cables
(CB4, CB5, CB6, CB7).
B. Remove coupler (CC24) connected to the C2 module.
C. Remove C2 module fastening screws (×4), and remove the C2
module.
15. Remove the shield plate (bottom).
A. Remove the shield plate (bottom) fastening screws (×7), and
remove the shield plate (bottom).
16. Remove the rear cover mounting brackets.
A. Remove the rear cover mounting bracket (top) fastening
screws (×4), and remove the rear cover mounting bracket (top).
B. Remove the rear cover mounting bracket (left, right) fastening
screws (×4 each), and remove the rear cover mounting brackets
(left and right).
Advertisement
