Advertisement
TH-42PA20E / TH-42PA20B
12.4. Sub brightness setting
1 PAL
Sub Bright
Pattern
Black 2 %
Black 0 %
PC
Sub Bright
Pattern
Picture:
PANEL W/B
Normal
All cut off 1) Set white balance to Cool .
Aspect:
16:9
** Adjust at the dark room.
Finish white balance adjustment
2) Adjust All cut off to start some pixels emission
at black 2% area and no emission at black 0% area.
3) Write down all cut off data.
4) Set white balance to Nornal .
5) Adjust All cut off to set same data of Cool mode.
6) Set white balance to warm .
7) Adjust All cut off to set same data of Cool mode.
8) Change to PC signal.
9) Copy PAL All cut off data to PC mode.
34
Advertisement
