Removable Components And Compatibility Matrixes - H3C S5170-EI Series Hardware Information

3
Removable components and
compatibility matrixes
Some switch models support removable components.
components available for the switch.
Table3-1 Compatibility matrix between switches and removable components
FRU model
Removable power supplies
CA-70A12
PSR75-12A
PSR150-D1
PSR180-56A
PSR360-56A
PSR720-56A
PSR1100-56A
PSR560-56D
With a CA-70A12 or PSR75-12A power supply installed, the S5570S-54F-EI switch supports a
maximum of 12 SFP-GE-T or SFP-GE-T-D GE copper transceiver modules.
For non-PoE switches, you can install one power supply, or two power supplies for 1+1 redundancy
on the switch. The switch supports a mixture of an AC power supply and a DC power supply.
For PoE switches, you can install one power supply, or two power supplies for 1+1 redundancy on
the switch. PoE capabilities vary by power supply configuration. When a power supply fails, PoE
capabilities of the switch might decrease. For more information about PoE power, see Table1-7.
For the S5570S-EI switch series, the removable components available for the switch might change
over time. For the most recent removable components available for the switch, see the release
notes.
For the S5570S-EI switch series, use the
electronic label information about the power supply. The CA-70A12 power supply does support
reading electronic label information.
S5570S-28S-EI
S5570S-54S-EI
S5570S-36F-EI
S5570S-54F-EI
Supported
Supported
Supported
Not supported
Not supported
Not supported
Not supported
Not supported
display device manuinfo power
Table3-1
S5570S-28S-HPWR-E
I
S5570S-54S-PWR-EI
S5570S-30MS-UPWR
-EI
Not supported
Not supported
Not supported
Supported
Supported
Supported
Supported
Supported
describes the removable
S5570S-30MS-UPWR
-EI
Not supported
Not supported
Not supported
Not supported
Supported
Supported
Supported
Supported
command to view