Sony DCR-HC15 Operation Manual page 19

Step 3 Using the touch panel
Operation buttons on each display
When the POWER switch is set to CAMERA
PAGE1 SPOT FOCUS, MENU, FOCUS, FADER, END SCH, SPOT METER,
EXPOSURE
PAGE2 SELFTIMER, LCD BRT, VOL
When the POWER switch is set to VCR
PAGE1 MENU, LCD BRT, VOL, END SCH
PAGE2 DATA CODE
PAGE3 V SPD PLAY, A DUB CTRL, REC CTRL
Notes
•When using the touch panel, press operation buttons lightly with your finger,
supporting the LCD panel from the back side of it.
•Do not press the LCD screen with sharp objects such as a pen.
•Do not press the LCD screen too hard.
•Do not touch the LCD screen with wet hands.
•If FN is not on the LCD screen, touch the LCD screen lightly to make it appear. You
can turn on or off the display with DSPL/BATT INFO on your camcorder.
When executing each item
The green bar appears above the item.
If the items are not available
The color of the items changes to gray.
When using the viewfinder
You can also operate with the touch panel (p. 56).
19