Install The Tank - Kohler Sterling 402024 Installation Manual

Tank Bolt
Gasket
Tank
Bowl
Washer
Brass Nut

3. Install the Tank

Carefully turn the tank upside down onto a protected surface. Fit
the rubber gasket over the flush valve nut so the tapered side of
the gasket faces out.
Carefully position the tank on the bowl by centering the gasket
on the bowl inlet. Line up the tank and bowl bolt holes.
CAUTION: Risk of product damage. Overtightening may cause
breakage or chipping of the vitreous china.
Install the bolt gaskets onto the tank bolts, and slide the tank
bolts down through the holes in the tank and bowl.
Assemble the washers and nuts to the tank bolts. Securely tighten
the nuts so the tank is level.
Be sure the nuts are tight enough to achieve a watertight seal.
1035429-2-C
Tank
Gasket
Bowl
Viewing The
Assembly From
Under The Tank
6
Tank
Sterling