Install The Tank - Kohler K-3447 Installation Manual

Tank Bolt
Washer
Gasket
Brass Nut

3. Install the Tank

IMPORTANT! Risk of product damage. Overtightening the tank
bolts may cause breakage or chipping of the vitreous china.
NOTE: Do not remove the pre-assembled tank bolts from the bottom
of the tank. The nuts and washers for securing the tank to the bowl
are packaged separately.
Position the tank on the bowl by centering the gasket on the bowl
inlet.
Assemble the washers and nuts to the tank bolts.
Tighten the nuts until snug.
Verify that the tank is level both left to right and front to back.
Make sure the nuts are tight enough to achieve a watertight seal.
Kohler Co.
Tank Bolt
Tank
Tank
Gasket
Bowl Inlet
Viewing The
Assembly From
Under The Tank
5
Tank
1021797-2-B