Verify The Dimms - Dell Data Domain DD6300 Manual

connector latches click into place.

Verify the DIMMs

Steps
1. Power up and system boot.
2. Log in.
3. Enter the system show meminfo command to see the top level summary. Confirm that the system reports the correct
amount of memory. The output, as shown for a 96 GB system, should be similar to the following:
# system show meminfo
Memory Usage Summary
Total memory:
Free memory:
Total swap:
Free swap:
4. Enter the enclosure show memory command to verify all DIMMs are discovered.
# enclosure show memory
This command may take up to a minute to complete. Please wait...
Enclosure 1
Number of DIMMS : 12
Memory Size: 98304 MiB
Locator Speed
(MHz)
------- ------- ------
DIMM 0 2133
DIMM 2 2133
DIMM 4 2133
DIMM 5 2133
DIMM 6 2133
DIMM 7 2133
DIMM 8 2133
DIMM 9 2133
DIMM 10 2133
DIMM 11 2133
DIMM 13 2133
DIMM 15 2133
5. Check for any new DIMM alerts.
# alerts show current
No active alerts.
98304 MiB
49152 MiB
983 MiB
983 MiB
Size Part No.
(MiB)
------------------
8192 18KSF1G72PDZ-1G6E1
8192 18KSF1G72PDZ-1G6E1
8192 18KSF1G72PDZ-1G6E1
8192 18KSF1G72PDZ-1G6E1
8192 18KSF1G72PDZ-1G6E1
8192 18KSF1G72PDZ-1G6E1
8192 18KSF1G72PDZ-1G6E1
8192 18KSF1G72PDZ-1G6E1
8192 18KSF1G72PDZ-1G6E1
8192 18KSF1G72PDZ-1G6E1
8192 18KSF1G72PDZ-1G6E1
8192 18KSF1G72PDZ-1G6E1
When the DIMM is fully seated you will hear a snap and feel the
Serial No.
----------
DFBDA944
32237E96
DFBDA967
32237E98
32237D72
32237EAF
32237D6F
32237EAD
DFBDA950
DFBDA94F
32237EAB
DFBDA94D
Field Replaceable Units 33