2. Reconnect the AC power cord and latch the bale to secure the plug.
Verify the power supplies
Steps
1. Enter the enclosure show powersupply command. The output for Enclosure 1 should be similar to the following
example:
# enclosure show powersupply
This command may take up to a minute to complete. Please wait...
Enclosure
Description
---------
--------------
1
Power module 0
1
Power module 1
---------
--------------
2. Enter the alerts show current command and confirm that the system has cleared the alert for the failed power
supply. It may take one to two minutes after the power supply replacement before the system clears the alert.
# alerts show current
No active alerts.
DIMMs
This sections describes how to remove and replace the DIMMs.
DIMMs overview
This topic provides information to assist servicing the DIMM FRUs.
The storage processor contains two Intel Haswell-EP processors each with an integrated memory controller that supports four
channels of memory. The storage processor allows two DIMM slots per channel, so the storage processor supports a total of 16
DIMM slots.
The following table specifies the tier memory sizes and DIMM types.
Model
DD6300 AIO Base
DD6300 AIO Expanded
DD6800 DLH
DD9300 DLH Base
DD9300 DLH Expanded
Status
-------
OK
OK
-------
Total Memory
48 GB
96 GB
192 GB
192 GB
384 GB
Memory DIMM Configuration
6 x 8GB
12 x 8GB
8 x 16GB +8 x 8GB
4 x 32GB + 4 x 16GB
8 x 32GB + 8 x 16GB
Field Replaceable Units
27