Table of Contents
Advertisement
Troubleshooting Guide
The card cannot be used.
If a card error message is displayed, see = 50 or = 613.
An error message is displayed when the card is inserted in
another camera.
Since SDXC cards are formatted in exFAT, if you format a card with this
camera and then insert it into another camera, an error may be displayed
and it may not be possible to use the card.
I have to press the shutter button twice to take a picture.
Set [ z : Mirror lockup] to [Disable].
The image is out of focus or blurred.
Set the lens's focus mode switch to <AF> ( = 54).
Press the shutter button gently to prevent camera shake ( = 56,
= 57).
With a lens equipped with an Image Stabilizer, set the IS switch to < 1 >.
In low light, the shutter speed may become slow. Use a faster shutter
speed ( = 112), set a higher ISO speed ( = 213), use fl ash ( = 164,
= 179), or use a tripod.
See "Minimizing Blurred Photos" on = 78.
There are fewer AF points or the Area AF frame shape is
diff erent.
Depending on the lens used, the number of usable AF points, AF point
patterns, Area AF frame shape, etc. vary.
598
Advertisement
Table of Contents
