Table of Contents
Advertisement
Inserting and Removing the Card
Removal
D
44
(1)
1
Open the cover.
•
Set
the
power switch to
<OFF>.
2
•
Check that the access lamp
(1)
is off,
then open
the cover.
•
If
[Saving
... ] is displayed on the
screen,
close the
cover.
Remove the card.
•
Gently push in the card
,
then let it go to
eject.
•
Pull the card straight
out,
then close the
cover.
•
When the access lamp is lit or blinking, it indicates that images are
being written to, read from, or erased from the card, or data is being
transferred. Do not open the card slot cover during
this
time. Also,
never do any of the following while the access lamp is lit or blinking.
Otherwise, it can damage the image data, card, or camera.
• Removing the card.
• Removing the
battery.
• Shaking or striking the camera.
• Unplugging or plugging in a power cord when using household power
outlet accessories (sold separately).
Advertisement
Table of Contents
