Inserting and Removing the Card
The captured images are recorded onto the
card.
D
•
Make sure the card's write-protect switch (1) is set upward to enable
writing and erasing.
Insertion
(1)
Formatting the Card
1
Slide the cover to open it.
2
Insert the card.
•
As shown by the
illustration,
face the
card's label side toward you and insert it
until it clicks in
place.
3
Close the cover.
•
Close the cover and slide it in the
direction shown by the arrows until it
snaps shut.
If the card is new or was previously formatted (initialized) by another camera
or computer, format the card with this camera
(QJ
183).
43
I