Contrast Adjustment; Dimmer; Switching Graphic Display; Black Mask - Kenwood KDC-515S Instruction Manual

Menu settings
Function of the KDC-X615/KDC-6015

Contrast Adjustment

This adjustment permits easy viewing of the display.
Display and setting:
"Contrast 0" – "Contrast 10"
NOTE
The initial setting value is "5" .
Function of the KDC-X615/KDC-6015

Dimmer

You can dim the display.
NOTE
The dimmer function is not available for units if the dimmer wire
is not connected.
Display and setting:
"Dimmer ON" : The dimmer setting is on.
"Dimmer OFF" : The dimmer setting is off.

Switching Graphic Display

You can turn the movement of graphic display on and off.
The initial setting is ON.
Display and setting:
"Graphic/GRAP ON" : The graphic display works.
"Graphic/GRAP OFF" : The graphic display does not work.

Black Mask

This function allows you to turn off the lower part of the
display if there is too much information in the display.
Display and setting:
"BLK MASK/BMSK ON" : The display will turn on by using only
"BLK MASK/BMSK OFF" : The display will turn on by using the

Switching preout

Switch the preout between the rear and non-fading. When you
switch to non-fading, you can adjust the volume separately.
The factory default is rear preout.
Display and setting:
"SWPRE Rear" : Rear preout
"SWPRE N-Fad" : Non-fading preout
NOTE
You cannot use the high-pass filter with non-fading preout.

KEX/ec4/dB (Sound Coordinate system)

When this system is set to on, the sound coordinate factors
(Bass Frequency, Bass quality, Bass extension, and Treble
frequency) appear during the audio control mode.
Display and setting:
"Kex/ec4/dB (set) ON" : The sound coordinate factors appear
"Kex/ec4/dB (set) OFF" : The sound coordinate factors are not
— 30 —
the upper part of the display and the
IN indicator (KDC-X615/6015 only).
whole part of the display.
Function of the KDC-X615
and can be adjusted.
appeared.