Fm Radio Interface - Nokia RM-645 Service Manual

RM-645
System Module
Figure 45 GPS interface

FM radio interface

The FM radio system is controlled by RAPU via the I2C bus. EM ASIC delivers the needed voltages and the clock
reference (32.768kHz SleepClk). EM ASIC also processes the analog audio.
The FM receiver fully supports reception over US/European (87.5MHz to 108MHz) FM band. The FM receiver
comprises an RF receiver with fully integrated VCO, a stereo FM demodulator and a RDS demodulator.
A headset accessory is used as an external antenna. The headset is connected to the AV connector.
FM radio is physically integrated with Bluetooth in the BTHFM module ASIC, but from a functional point of
view FM radio and Bluetooth have nothing in common.
Figure 46 FM radio interface
Issue 1 COMPANY CONFIDENTIAL Page 6 – 19
Copyright © 2010 Nokia. All rights reserved.