Orbital Drive Toothed Belt - Siemens SIREMOBIL Iso-C Service Instructions Manual

6 - 42
Fig. 17
1
2
Fig. 19

Orbital drive toothed belt

NOTE
•
Loosen the belt tensioner of the toothed-belt orbital drive (1/Fig. 17).
•
Disconnect the connecting cables of the orbital motor (motor cables + incremental en-
coder).
•
Loosen the 2 fastening screws of the mounting plate (incl. motor) (1/Fig. 18).
•
Loosen the 2 fastening screws at the two lateral brackets (1/Fig. 19).
•
Carefully remove the mounting plate incl. motor. In doing so, push the toothed belt off the
pulley, ensuring that the actual value potentiometer and its pulley are not damaged or
bent.
•
Unscrew the two lateral brackets from the coupling unit (3 Allen screws each,
(2/Fig. 19).
SIREMOBIL Iso-C
System Manual
Replacing boards / replacing components
1
1
2
Only applies to SIREMOBIL Iso-C 3D.
SPR2-230.061.01
Rev. 13
1
1
Fig. 18
1
Fig. 20
Page 42 of 48
12.04 CS PS 24
6
Siemens AG
Medical Solutions