Suzuki SWIFT 2022 Series Owner's Manual page 495

INSPECTION AND MAINTENANCE
EXAMPLE
3) Open the end of the cover inside the
fender.
EXAMPLE
(4)
(3)
4) Disconnect the coupler (3) by pushing
the lock release. Turn the bulb holder
(4) counterclockwise and remove it.
7-75
Daytime running light (if equipped)
LED type
Since special procedures are required, it is
recommended that you take your vehicle
to an authorized SUZUKI dealer for light
replacement.
Rear combination light
For LED tail / brake light, it is recom-
mended that you take your vehicle to an
EXAMPLE
authorized
replacement since special procedures are
52RM70250
required.
(2)
1) With the tailgate opened, remove the
52R70140
bolts (1) and pull the light housing (2)
firmly to the rearward.
SUZUKI dealer for light
(1)
52RM70160
(3)
(4)
2) Remove the wire (3) from a clamp (4).
3) To remove the bulb holder of the rear
turn signal light (5) or the reversing light
(6) from the light housing, turn the
holder counterclockwise and pull it out.
52RS70030