Suzuki SWIFT 2022 Series Owner's Manual page 471

INSPECTION AND MAINTENANCE
NOTE:
During installation, check that the wires,
couplers, sealing rubber of air cleaner
chassis and washers,
returned in place.
EXAMPLE
Correct Wrong
NOTICE
• When pulling out the ignition coils,
do not pull on the cable. Pulling on
the cable can damage it.
• When servicing the iridium/plati-
num spark plugs (slender center
electrode type plugs), do not touch
the center electrode, as it is easy to
be damaged.
7-51
are correctly
• When installing the spark plugs,
screw them in with your fingers to
78K179
avoid
Tighten the spark plugs with a
torque wrench to 18 Nm (1.8 kg-m,
13.0 lb-ft). Do not allow contami-
nants to enter the engine through
the spark plug holes when the
plugs are removed.
• Never use spark plugs with the
wrong thread size.
Loosen
Tighten
60G160
NOTICE
stripping the threads.
Spark plug gap "a":
ILZKR6F11
1.0 – 1.1 mm (0.039 – 0.043 in.)
NOTICE
When replacing spark plugs, you
should use the brand and type speci-
fied for your vehicle. For the specified
plugs, refer to "SPECIFICATIONS"
section in the end of this book. If you
wish to use a brand of spark plug
other than the specified plugs, con-
sult an authorized SUZUKI dealer.
54G106