Disassembly Instructions – 2 - Aiwa XR-MS5 K Service Manual

DISASSEMBLY INSTRUCTIONS – 2

DISASSEMBLY AND REASSEMBLY OF AZG-X (30) AND AZG-A (10)
1) Removing the PWB, CD
(1) Short the shorting-lands on the flexible card wire of the optical pickup by soldering.
(2) Disconnect wires from the connectors CN706 and CN707.
(3) Remove soldering of the loading motor.
(4) Remove the four screws A and remove the PWB, CD.
* To reassemble it, reverse the steps of disassembling as described above.
2) Removing the PLATE CD RE
(1) Remove the three screws A and remove the PLATE CD RE.
* When reassemble it, be careful of the slits and boss.
All manuals and user guides at all-guides.com
4) A
3)
CN706
2)
4) A
A
PLATE CD RE
* BOSS
A
1) Shorting-land of pickup
4) A
CN707
2)
* SLIT
– 8 –