Key Features - Agilent Technologies E4438C Datasheet

Key Features

Key standard features
Optional features
4
• Expandable architecture
• Broad frequency coverage
• Choice of electronic or mechanical attenuator
• Superior level accuracy
• Wideband FM and FM
• Step and list sweep, both frequency and power
• Built-in function generator
• Lightweight, rack-mountable
• 1-year standard warranty
• 2-year calibration cycle
• Broadband analog I/Q inputs
• I/Q adjustment capabilities and internal calibration routine
• Excellent modulation accuracy and stability
• Coherent carrier output up to 4 GHz
• Internal baseband generator, 8 or 64 MSa (40 or 320 MB) memory with
digital bus capability
• ESG digital input or output connectivity with N5102A Baseband Studio
digital signal interface module
• 6 GB internal hard drive
• Internal bit error rate (BER) analyzer
• High-stability time-base
• Enhanced phase noise performance
• High output power with mechanical attenuator
• Move all front panel connectors to the rear panel
• 3GPP W-CDMA FDD personality
• cdma2000 and IS-95-A personality
• TDMA personality (GSM, EDGE, GPRS, EGPRS, NADC, PDC, PHS, DECT, TETRA)
• Calibrated noise (AWGN) personality
• GPS personality
• Signal Studio for 1xEV-DO/1xEVDO Rev A
• Signal Studio for 1xEV-DV and cdma2000
• Signal Studio for 802.11 WLAN
• Signal Studio for Bluetooth™
• Signal Studio for enhanced multitone
• Signal Studio for HSDPA over W-CDMA
• Signal Studio for TD-SCDMA
• Signal Studio for Noise Power Ratio (NPR)
• Signal Studio for S-DMB
• Signal Studio for T-DMB
• Signal Studio for pulse building
• Signal Studio for jitter injection
• Signal Studio toolkit
• Signal Studio for 802.16-2004 (WiMAX)
• Signal Studio for 802.16 OFDMA
• Signal Studio for DVB
This document contains the measured specifications for the instrument platform
and personalities. It does not contain a full list of features for all optional
personalities. Please consult the individual product overviews for each
personality for a full listing of all features and capabilities. These are listed
at the end of this document.