No.
Item
19 Supply reel lock/ Take-up reel lock
Supply reel lock
Supply side spring (P6)
hook position
¢
∞
20
Pinch cam gear/
Rear Side Cam Slot
Multemp SH-P
M 3
See
in section 5.
Ref. Illustration
( P6 )
Take-up reel lock
Take-up side spring (P6)
hook position
Fig. 2.6.19
Main cam
( S2 )
Main cam
Fig. 2.6.20 (1)
<Disassembly>
Supply reel lock:
1) Unhook the spring (P6) and lift the supply reel lock
upward to remove.
( P6 )
Take-up reel lock:
1) Unhook the spring (P6) and lift the take-up reel lock
upward to remove.
<Assembly>
1) Reverse the disassembly procedure.
<Disassembly>
Pinch cam gear:
1) Lift the pinch cam gear upward to remove.
Main cam:
1) Remove the screw (S2) and remove the main cam.
<Assembly>
Pinch cam gear
1) Reverse the disassembly procedure.
2) Attach the main cam and pinch cam gear so that
their phase relationship is as shown in the figure.
Procedure
Fig. 2.6.20 (2)
2-19