Table of Contents
Advertisement
No.
Item
!
7
Idler arm assembly
( S2 )
Emergency gear
( P2 )
Ref. Illustration
( S2 )
Idler cover
Idler arm
Fig. 2.6.7
Procedure
<Disassembly>
1) Remove the two screws (S2) and remove the idler
cover.
2) Remove the idler arm.
3) Remove the emergency gear.
4) Remove the spring (P2).
<Assembly>
1) Attach the Idler arm and the Emergency gear into
the Idler cover.
2
Rotate the Idler arm to the clockwise direction.
(Check the Idler arm moves smoothly.)
3
Install the Emergency gear into
the Idler cover and push it lightly.
2) Attach the Idler arm assembly onto the Main deck.
4
1
Hook to the
Hook to the
shaft of the
shaft of the
Main deck.
Main deck.
5
Fit to the
2
Fit to the boss of
boss of the
the Main deck.
Main deck.
3
Rotate the Emergency gear with screw drive
then fit the gear of the Idler arm and the Reel
Motor gear.
Caution : When install the Idler arm assembly
into the main deck, if the gear of the
Idler arm and Reel Motor gear does
not fit, these geare may damaged.
1
Insert a point
of the Idler arm
2-11
Advertisement
Chapters
Table of Contents
