Parts For Ceiling Mount (Optional); Screen Size And Throw Distance - Panasonic PT-TX440 Operating Instructions Manual

Parts for ceiling mount (Optional)

This requires an optional ceiling mount bracket. Be sure to use the Projector Mount Bracket together with the ceiling mount
bracket for high ceilings or low ceilings.
Model No.: ET-PKL100H (for high ceilings), ET-PKL100S (for low ceilings), ET-PKL430B (Projector Mount Bracket)
f Use only the ceiling mount brackets specified for this projector.
f Refer to the Installation Instructions for the ceiling mount bracket when you install the bracket and the projector.
Attention
f To ensure projector performance and security, installation of the ceiling mount bracket must be carried out by your dealer or a qualified
technician.

Screen size and throw distance

Refer to the screen size and projection distances to install the projector. The image position can be adjusted in
accordance with the screen position.
f Following illustration is prepared on the assumption that the projected image size and position have been
aligned to fit full in the screen.
L
SH
SW
H
SD
Attention
f Before installing, please read "Precautions for use" (x page 15).
Chapter 2 Getting Started - Setting up
Projected image
SW
Projection distance
Image height
Image width
Distance from the center of lens to the image lower end
Projected image size
Screen
L
L
Screen
ENGLISH - 29