Advertisement
Once all footswitches are pressed the LCD will display:
Pressing [STOP] will then bring the user to the test select page. Pressing [STOP] during
the test will abort the test, and the LCD will display:
Pressing [STOP] will then bring the user to the test select page. If during the test more
than one footswitch is detected at a time, the LCD should display:
8. Test 6: Jog Test
The LCD should show display the following:
When the test is executed, the LCD should show:
As the user turns the jog wheel, the value should update on the display by increasing or
decreasing the current value. The second line should show the current integer value in
signed format.
9. Test 7: Audio Out Test
The LCD should show display the following:
When the test is executed, the LCD should show:
FOOTSW
Passed
FOOTSW
Abort
FOOTSW
Failed
Diag
Jog
JOG
0
Diags
Audio
AUDIO
All
Advertisement
