Advertisement
The user will then press the pads one at a time. When each pad is pressed, its number
and the input velocity shall appear on the second line, such as:
or
Once all pads are pressed the LCD will display:
Pressing [STOP] will then bring the user to the test select page. Pressing [STOP] during
the test will abort the test, and the LCD will display:
Pressing [STOP] will then bring the user to the test select page. If during the test more
than one pad is detected, the LCD should display:
7. Test 5: Footswitch Test
The LCD should show display the following:
When the test is executed, the LCD should show:
The user will then press the footswitches one at a time. When each pad is pressed, its
name shall appear on the second line, such as:
or
PADS
16v127
PADS
1 v001
PADS
Passed
PADS
Abort
PADS
Failed
Diags
Footsw
FOOTSW
FOOTSW
Start
FOOTSW
Count
Advertisement
