Table of Contents
Advertisement
J - Deodorization...auto Deodorization setting
Hold and press this button to enter auto Deodorization setting, press Deodorization icon to switch dials per
activation or deactivation circulation.
1. All indicating LED ON above position icon, indicating auto Deodorization setting activated, toilet generate one short beep.
2. All indicating LED OFF above position icon, indicating auto Deodorization setting deactivated, toilet generate one short beep.
K - Cover...auto cover OPEN and sensing distance setting
Long press this button to start auto cover OPEN and sensing distance setting mode; cover icon blinks slowly.
Press cover icon again to change setting per OFF, near, mid, far, OFF, near ......circulation.
1.
When massage indicating LED lights OFF, indicates auto cover OPEN function stops. Toilet generates one long beep.
2.
When massage indicating LED 1 lights up, indicates auto cover near distance function starts. Toilet generates one short beep.
3.
When massage indicating LED 2 lights up, indicates auto cover mid distance function starts. Toilet generates one short beep.
4.
When massage indicating LED 3 lights up, indicates auto cover far distance function starts. Toilet generates one short beep.
Note: long press function button to setup functions, the toilet will exit function setting when customer does not
have any action or press any key within 10s.
Remote controller battery usage and replacement
Remote docking station uses four AA alkaline batteries.
When battery is low, remote red LED blinks and lights up, indicates the replacement of battery.
Note:
1.
The +/- polarities of battery must be consistent with the
mark of remote controller.
2. Do not mix new and old batteries.
3. Please use alkaline battery.
Others
Prevent liquid from spraying the remote or do not soak remote into the liquid.
Do not place remote around the small household appliances, such as hand dryer or hair dryer etc. to
prevent remote from interference.
Do not apply frequent and violent external force on remote buttons.
Place remote back to docking station on the wall after usage.
Prevent remote from dropping in the process of use.
Kohler Co.
: secure remote with base by screws, specific method refers to installation guide.
Place 4 AA alkaline batteries in per "+/-"indication as shown
9
Red LED blinks
Open battery container
cover with a dollar coin.
4 AA alkaline batteries
1396802-T01-C
OPEN
Advertisement
Chapters
Table of Contents
