Using The Tuner; Setting The Am Tuner Interval Spacing; Tuning In A Station - JVC CA-V908T Instructions Manual

Using the Tuner

DISC 1 DISC 2 DISC 3
PRO LOGIC 3CH LOGIC TEST TONE SLEEP
ONSCREEN SOUND
CENTER
– +
LEVEL MODE
CENTER MODE
Number buttons
REAR FM MODE
– + V.INTRO
/ECHO
LEVEL DELAY TIME
FM MODE/ECHO
HIGHLIGHT
FM/AM
L BALANCE R S.A.BASS
FM/AM
REC PAUSE
TAPE AUX
SHIFT A
TAPE A TAPE B
SHIFT B
SELECT STILL
CD
FADE MUTING RETURN REPEAT
+
NEXT
MULTI CONTROL
VOLUME
PREV
–
KEY CONTROL
+
FM/AM
or
18
DISC
DISC
DISC
Display
You can listen to both FM and AM stations. Stations can be tuned in manually, automatically, or from
preset memory storage.
Before listening to the radio:
• Check that both the FM and AM antennas are firmly connected. (See page 4.)
Setting the AM Tuner Interval Spacing ——————————
Some countries space AM stations 9 kHz apart, and some countries use 10 kHz spacing. Europe, the U.K.,
Australia, and some other areas use 9 kHz spacing, while Canada, the United States, and some other
Western Hemisphere countries use 10 kHz spacing.
To select the 10 kHz interval, be sure that the Unit is in STANDBY mode. Turn on by pressing
while holding down TUNING UP on the MULTI CONTROL. "AM --10" appears on the display.
To select the 9 kHz interval, be sure that the Unit is in STANDBY mode. Turn on by pressing
while holding down TUNING DOWN on the MULTI CONTROL. "AM -- 9" appears on the display.

Tuning in a Station

Press FM/AM to turn on the radio.
The frequency of the previously selected channel appears on the display.
PROGRAM
/RANDOM
REPEAT
EDIT
Band display, Frequency display, Preset channel
When the System is being used, the display shows other items as well.
However, we have only shown the items described in this section.
SET
MULTI CONTROL
FM/AM
When FM or AM is
selected as the source, the
button lights up.