Samsung RH62K Series Service Manual page 59

TROUBLESHOOTING
Code
1) For example, if you want to change freezer compartment standard temperature to -4℉(-2°C) by
operating option, do as below. This function is for changing the standard temperature.
In -2℉(-19°C) of current temperature of freezer compartment, if you make the temperature lower to
-4℉(-2°C) by the option, the standard temperature would be controlled -6℉(-21°C)
Therefore, if you change the setting of temperature option to -2℉(-19°C) on the panel, the appliance
will be operated with -6℉(-21°C). It means that standard temperature is controlled -4℉(-2°C) less than
setting temperature in the display.
NOTE
Code
2) After changing to the option mode, fridge compartment "0" , freezer compartment "0" will be
displayed. ( Basically fridge compartment "0", freezer "0" would be set at shipping process, but setting
value could be changed for the purpose of improving product at mass producing process.)
- If fridge compartment "0" shows only, temperature reference value of freezer compartment will be
Code
set and current freezer compartment temperature code will be displayed on the freezer temperature
display.
3) If freezer compartment "4" is set as below freezer compartment code after fridge compartment "0 is
set, standard temperature of freezer compartment will be lower than -4℉(-2.0°C).
(Refer to the picture "changing the freezer compartment temperature")
Code
Code
: If you wait for 20 seconds after completing the setting, MICOM will save the setting value to the
EEPROM and normal display will be returned and the option setting mode will be canceled.
4) Option changing method as above is the same as all model.
5) By the same method as above, it is possible to control the fridge compartment temperature, water
supply, ice-maker harvest temperature/time, defrost return time etc.
Code
6) Option function is set in the EEPROM at shipping process in the factory.
You would better not to change the option of your own.
Completing the setting is that option function return to normal display after 20 seconds.
Do not turn off the appliance before returning to the normal display mode.
Code
NOTE
Code
RS6500KC(RH62K)-FSR-160106.indd 59
Reference Value
Basically, all the data in option has cleared from the factory.
Therefore, almost all setting value are "0".
But, some setting values could be changed for the purpose of improving
performance. You need to check the product manual and/or specification.
Reference Value
Reference Value
Reference Value
Reference Value
Reference Value
Reference Value
Option setting function exists in the other items.
We will skip the explanation of the other functions by the option because it is
associated with refrigerator control function and is not needed at SERVICE.
(Please do not set the other options except above SERVICE Manual.)
Reference Value
59
2016. 1. 7. 11:04