Samsung RH62K Series Service Manual page 49

TROUBLESHOOTING
4-2-3. Self-diagnostic function
1) Self-diagnostic function in the Initial power ON
1-1) Micom operates self-diagnostic function to check the temperature sensor condition within 1 second
when the refrigerator turned On initially.
1-2) If bad sensor is detected by the self-diagnostic function, the applicable display LED will blink for 0.5
sec.
At this moment, there is no beep sound.(Refer to self-diagnostic CHECK LIST)
1-3) Self-diagnostic button is recognized only when the error is displayed by the bad sensor. Display does
not operate normally but temperature control will be controlled by the emergency operation.
1-4) When the error is detected by self-diagnosis, the error can be canceled automatically if all troubled
sensors are corrected or Self-diagnostic function key Freezer Key + Fridge Key (Dispenser Model) /
Freezer Key + Control Lock Key (Normal Model ) are pressed simultaneously for 8 (Dispenser Model)
/ 10 (Normal Model) seconds (Return to normal display mode)
① Freezer Key + Fridge Key (Dispenser Model) / Freezer Key + Control Lock Key (Normal Model)
are pressed simultaneously for 8 (Dispenser Model) / 10 (Normal Model) seconds, the error
mode by self-diagnosis will be canceled.
RS6500KC(RH62K)-FSR-160106.indd 49
NORMAL MODEL DISPENSER MODEL
①
①
49
①
①
2016. 1. 7. 11:04