Samsung RH62K Series Service Manual page 44

TROUBLESHOOTING
04 Fridge / Power Cool (3 sec)
The Fridge button can be used to set the fridge temperature, or to activate/deactivate
Power Cool.
Fridge
Power Cool
05 Door Alarm
Door Alarm
06 Filter
Filter
RS6500KC(RH62K)-FSR-160106.indd 44
You can manually adjust the cooling temperature for the fridge.
Keep pressing Fridge to cycle through the temperature bar, and
select a desired temperature between 1 °C (34 °F) and 7 °C (44 °F).
Power Cool speeds up the cooling process at maximum fan speed.
This is useful to quickly cool food that spoils quickly, or after
the door is left open for some time. The fridge keeps running
at full speed for several hours and then returns to the previous
temperature. Press and hold Power Cool for 3 seconds.
You can set the alarm for a reminder. If the door is left open for
more than 2 minutes, the alarm will sound with the Alarm indicator
( ) blinking.
The alarm is enabled by factory default.
To disable the alarm, press Alarm. To enable, press Alarm again.
After about 6 months (approximately 1200 ) of using the original
press and hold Filter Reset
reset and the Filter indicator turns off. The icon will blink red for
several seconds when you open or close the door.
NOTE
Some regional areas have relatively large amounts of lime
44
2016. 1. 7. 11:03